Why-Are-Gun-Magazines-Curved

Why Are Gun Magazines Curved? – Gunsmith Analysis

Since most machine guns feature a curved magazine, they are marked out as lethal and deadly weapons. Moreover, this feature makes them rampant to fire more than a single bullet per trigger pull. This article will focus on the importance of the curved shape of the magazines.

First of all, the distinctive banana shape offers far more benefits than the apparent design quirk. Thus, compared to a straight one, a curved magazine provides more advantages in all military situations. Also, machine guns feature bullets that are triangular and have a thinner top. As a result, stacking several such shots will lead to a natural curve forming as they fit together. Therefore, having a curved magazine will enable you to stack more rounds.

This trick becomes an ideal advantage for a weapon that blasts out several bullets than a regular gun. The curvature also allows for smoother feeding of pellets. This step can become more useful, especially in high-pressured battle ground environs where such weapons are used.

  1. Curved Magazine: Conical cartridge shells, more correctly called conical cartridge bodies, are popular because they are more reliable in feeding and extracting than cylindrical cartridges.
    • The pressure generated by the burning gunpowder pushes in all directions, including pushing against the cartridge wall and makes it more tightly pressed against the cartridge wall than when it entered.
    • This trick increases the force required to remove the used case. This friction due to the shell’s expansion by the pressure will persist until the shoulder passes through the breach for cylindrical cartridges.
    • In turn, increasing the total force required for extraction (and this force must come from most military Somewhere in the rifle) by transferring some gas pressure in the barrel). The tapered bullet shell only has temporary extraction resistance.
    • Once the bullet starts to move, the chamber wall becomes more expansive than the shot in each cross-section, so the sleeve’s friction against the chamber wall is significantly reduced.
    • For similar friction-based reasons, the tapered housing is also easier to insert. Besides, the chamber’s breach is wider than the bullet’s neck or shoulder to fit on the broader cartridge base. This tip can reduce feed jams by loosening the bolt and magazine’s inherent “tolerance” aligned with the breach so that the bullet can get pushed right into the chamber.
    • However, the trade-off is curved, so the magazine is less space-efficient to keep the bullets stable in the magazine so that the rifle can place the bullets in the desired position when they are sent into the magazine.
    • This trick helps to ensure the bullets’ arrangement direction to be in full contact along the shell’s length. Contact a bunch of cones with their surface from point to bottom, and then get a circle. The wider the angle of the cone, the less the number required to make a circle. For example, the more tapered your gun’s bullet is, the more bowed the magazine must be.
  2. Why Are Magazines Curved? – As humans, we like to pack things in squares; we don’t want to fill the air. None of the curved magazines have any boxes checked. The magazine’s most effective packaging is also curved, so you waste the space inside or outside the box.
    • On soldiers’ uniforms and tool kits, magazine sleeves must be more comprehensive so that the seams can be straight or curved and difficult to pull out when refilling. This curve will also reduce the reliability of paper feeding in many situations.
    • It is more essential, especially in a box magazine with a follower and a coil spring. The spring moves like a straight line, so it is forced to surround the magnet Bending will cause the spring to bind, which will lead to feeding failure. In extreme cases, the taper will limit the maximum magazine capacity of magazines’ styles because of the need
  3. Why Are Some Magazines Curved: Western/NATO rifle cartridges, especially those developed by the United States, have historically been less tapered than Asian and Russian cartridges. German, British, French, and American cartridges are designed for more precise design and more forgiving weapons. In contrast, Russia and many Asians’ design concepts focus on a mixture of simplicity and reliability (the first is auxiliary, while the second is extra) large-scale, low-cost production to make large-scale military equipment effective, not even the most advanced weapon technology.
history of gun magazine

Many updated rifle chambers, including the Russians who replaced 7.62 (5.45x39mm) guns in their army, separated the two. They are not tapered, so the magazines can be straight and more comfortable to pack.

Nevertheless, they are not cylindrical, so they retain the more comfortable feeding and retraction that the taper provides. Since the magazines feature tapered casings, stacking them on top of each other prevents them from forming a straight line.

Therefore, it is a simple matter to install the feed assembly on all two sides of the gun and use a simple joystick selector to determine which will be peeled off by the bolt. This strategy allows the gunner to load two different ammunition types and switch between them according to the kind of target he needs to hit.

Some use belt feed as the main ammunition supply and use a 10 or 20 rounds hopper or spring magazine as extra ammunition. Teachers and school-going kids can relate to this by trying to stack a couple of binders together, one on top of the other.

The curved magazine’s design is that the bullet can enter the gun correctly when loaded and fired. The container’s curved shape can prevent the shot from starting to tilt toward the nose when the cone shell is pushed up by the spring.

Suppose you try to use a straight magazine to load the tapered surface. In that case, the result is a higher probability of misfeeding because the bullet always tries to point downward, which prevents the gun’s loading action from peeling it from the magazine and entering into the bore. Generally speaking, the shape on most aminations has some key benefits to its functions. The same applies to magazines. The most precise answer to this question is that it is an adaptation-like strategy to improve its performance.

The bottom line is that most soldiers would prefer to use curved guns than flat ones. The main reason is that they are more effective in that they target better. They are also simple to use to deliver unbeatable results once you get used to using them. All in all, it would be best to check out more tips from experts who often showcase new tricks. The tips available only improve occasionally, and over time this industry will feature improved approaches. Above all, once you gain experience using such guns, you will feel the benefits of the weapons’ shape naturally.

About the Author Steve

I'm Steve & I've been hunting most of my life. I'm passionate about sharing what I've learnt with my fellow hunters. Riflescopely helps me do just that!

Leave a Comment: